HP350 Water Well Drilling Rig-manufacture,factory,supplier from China

The HP350 water well drilling rig is specially designed for stable operation at high altitudes. Its power system is optimized to maintain strong drilling capability even in highland areas with an altitude of over 5,000 meters. At the same time, the key components of the drilling rig are protected against low temperatures, which ensures reliable startup and normal operation even in cold environments as low as -30 degrees Celsius.HP350 water well drilling rig adopts weatherproof shell design, which can effectively resist the attack of strong wind and rain.

HP800 water well drilling rig adopts a number of advanced drilling technologies, which greatly improve drilling efficiency and operational reliability.All-round protectionAdopting rugged drilling tower and chassis design, the HP800 water well drilling rig is able to effectively withstand the impact of harsh environments, such as high temperature, low temperature, wind and sand, and so on.Key components, such as hydraulic system and electrical system, have adopted multiple protection measures to ensure the reliable operation of the equipment.Humanized safety protection devices can maximize the

HP380 water well drilling rig focuses on energy consumption and emission control, adopting energy-saving hydraulic system and optimized design engine to reduce energy consumption. Meanwhile, its emission treatment system meets the requirements of environmental protection and reduces the emission of harmful gases. This not only reduces operating costs, but also positively responds to environmental protection policies and meets the requirements of sustainable development.

HP680 water well drilling rig adopts advanced high-power hydraulic motor as the drive, together with the high-flow hydraulic pump, which can provide the drill bit with sufficient propulsion force and rotational speed to ensure fast and efficient cutting of rock and soil under various geological conditions. The hydraulic system responds quickly to accurately control the drilling speed and thrust to ensure optimal drilling efficiency.The HP680 uses drill pipes and bits optimized for water well drilling.

HP450 water well drilling rig adopts advanced drilling technology to complete drilling operations efficiently. Its drill bit and drill pipe design are carefully optimized to improve cutting efficiency and drilling speed. Meanwhile, the advanced hydraulic control technology provides precise drilling parameter adjustment to ensure the best drilling performance.

HP500 water well drilling rig adopts professional drilling technology to ensure its stability and high efficiency under various geological conditions. Its drill bit and drill pipe designs are carefully optimized to meet the drilling needs of different geological formations. Meanwhile, its hydraulic drive system can provide sufficient torque and propulsion force to enable the drill bit to cut through the rock and soil layers quickly and efficiently.

Water Well Drill Pipe is usually threaded with specially designed and reinforced joints to ensure a solid connection during rotary drilling and to avoid drilling interruptions due to damage to the joints.Considering the possibility of exposure to wet soil and groundwater in underground environments, water well drill pipe is usually treated against corrosion, such as galvanized or other anti-corrosive coatings, to prolong its service life and reduce maintenance costs.Water well drill pipe often meets international standard specifications for length, diameter, and thread type to ensure compatibi

For different geological conditions, our drilling rigs are equipped with a variety of interchangeable drill bits and drill pipes, which can be flexibly selected by users according to the actual situation. At the same time, our hydraulic control system can precisely adjust the drilling parameters to ensure the best performance under various geological conditions.Our CompanyOur company provides users with all-round product support and quality experience with professional and reliable services.

Serrated Tri-Cone Well Drill Bits are made of high quality alloy steel material, usually precision alloyed steel with excellent hardness and wear resistance.

The 112mm PDC Core Drill Bit is engineered to excel in a wide range of formations, from soft to hard. Its versatile design ensures consistent performance across various drilling conditions, making it a reliable choice for well drilling projects.The 112 mm PDC core drill bit is manufactured using high quality materials and PDC cutters, resulting in excellent durability and wear resistance.

Yt29 (s) air leg type rock drill is a heavy-duty air leg type rock drill rig, which is especially suitable for the construction field of railroad, highway, water conservancy and so on. Meanwhile, it is also an alternative product for road excavation and all kinds of rock drilling operations in railroad, metallurgy, coal and other mines.

The critical technical parameters of impregnated diamond core bits encompass diamond type, size, concentration, and grade, as well as matrix hardness and crown shapes. These parameters can be tailored to suit the specific rock formations being drilled.

In tunnel excavation and quarrying projects, taper rock bits play a crucial role in creating access points and extracting materials from the earth. Their ability to penetrate hard rock formations with ease makes them indispensable tools for tunneling and quarry operations.Geothermal water well mining projects also benefit from the use of taper rock bits, as they enable drilling deep into the earth to access geothermal energy sources.

Enhanced work efficiency: The HC25 and HC28 Holding Sleeve Thrust Sleeve's compact design and high quality materials ensure a tight connection with the rock drill rig, which effectively enhances transmission efficiency. This efficient drive system enables the rock drilling rigs to complete their tasks faster and more consistently during drilling operations, saving time and costs.

A steel teeth tricone bit, also known as a milled tooth tricone bit, is a type of rotary drilling tool used in the oil and gas industry, mining, water well drilling, and other drilling applications. It is designed to effectively drill through different rock formations, including soft to medium-hard formations.The key feature of a steel teeth tricone bit is the presence of steel teeth or cones on the bit. These cones are equipped with milled steel teeth that are shaped like sharp wedges or chisels.

Flat teeth foundation drilling refers to a method of drilling foundations using a drilling rig equipped with flat teeth or cutting tools. These flat teeth are designed to efficiently cut through different types of soil and rock formations, allowing for the construction of stable foundations for structures such as buildings, bridges, and dams.The key features of flat teeth foundation drilling include:1. Flat-shaped teeth: Unlike conical or bullet-shaped teeth, flat teeth have a broad, flat surface that enables them to effectively cut through soil or rock with less resistance.

Dome reaming bit is a specialized tool essential for increasing the diameter of holes during drilling operations. This tool finds extensive application in the development of oil and gas wells, water wells, geothermal wells, and various other types of wells.

Drifter drill rods come in a variety of sizes and specifications tailored to meet the specific needs of different drilling operations. The standard sizes include 22mm, 25mm, and 28mm, with lengths varying from 800mm to 6000mm. The inner hole diameter of the drill rods falls within the range of 11mm to 19mm.Functions: Drifter drill rods serve the crucial purpose of transmitting power from the drilling rig to the drill bit. Their hollow construction enables debris flushing and allows for the introduction of compressed air or water to aid in the drilling process.

The R32 MF rod is a crucial component in exploratory drilling operations, where it serves multiple functions to ensure efficient and effective borehole creation. One of its primary functions is to transmit torque and thrust from the drill rig to the rock drilling bit. This transmission of force and rotation is essential for the bit to penetrate the rock formation and create the desired borehole.The high-quality steel construction of the R32 MF rod is a key feature that sets it apart in the drilling industry.

HC50 Drill Tail is made of high quality alloy steel material with high strength and abrasion resistance, capable of withstanding high intensity impact and torsion force. Its excellent corrosion and abrasion resistance enables it to be used for a long time in harsh working environments without deformation or damage, providing a solid guarantee for the stability and reliability of the equipment.The HC95 Drill Tail has been designed with precision connections in mind, and undergoes a rigorous machining process to ensure a precise connection to the rock drilling rig and rock drilling bits.

Flat teeth technology significantly improves drilling performance and productivity in foundation projects.

The top hammer buttons bit is designed to provide efficient and effective drilling in challenging conditions. The carbide buttons are strategically placed on the bit body to ensure maximum impact and penetration when drilling through hard rock formations. This design helps to increase the speed and accuracy of the drilling process, ultimately improving productivity on mining and construction sites.The shank of the top hammer buttons bit is designed to connect the drill bit to the drilling rig, providing stability and control during the drilling process.

Advanced Technology and ReliabilityA good quality core drilling machine is built with the latest advancements in drilling technology. It incorporates high-quality components and a robust design, ensuring consistent performance and minimal downtime. These machines are engineered to handle the most challenging drilling conditions, delivering reliable and accurate results every time.High torque and powerful rotationCore drilling machines are designed to provide high torque and powerful rotation, enabling operators to drill through a wide range of materials with ease.

Flat teeth are essential components used in foundation drilling operations to achieve stability, efficiency, and precision in creating deep and strong foundations for various construction projects. These specialized flat teeth are designed to provide reliable cutting performance, durability, and versatility in challenging soil and rock conditions. Type: Foundation Drilling ToolsApplication: Auger TeethCondition: NewTip Material: Tungsten CarbideBody Material: ASTM4140 (42CrMo)Wear parts flat tooth are engineered to deliver precision and accuracy in foundation drilling tasks.